Video scenes shots:
Watch the video:
Other videos by this author:
 |
Mach 3 Backlash Compensation Posted by: hossmachine
Video duration: 592 seconds Mach 3 Backlash Compensation settings and demo circle pocket Related: backlash, compensation, hossmachine, mach |
 |
Tool Change Screenset Intro Posted by: hossmachine
Video duration: 537 seconds Tool Change Screenset Intro Made a custom Tool Change page for Mach 3 for my 16T ATC that includes an automatic tool probe for setting the Z axis and edge finding Related: atc, change, hossmachine, mach, screens, tool |
 |
16T ATC Better Tool Changes Posted by: hossmachine
Video duration: 377 seconds 16T ATC Better Tool Changes Edited the M6start macro to move the B, X and Y axis' together to speed up the tool changes. Related: atc, change, hossmachine, mach, tool |
 |
MPG Under Brain Control Posted by: hossmachine
Video duration: 383 seconds Shows the function of my Mill Console MPG Panel working under the control of a Brain with Mach 3 Related: brain, console, hossmachine, mach, mpg |
 |
Automatic Tool Changer Posted by: hossmachine
Video duration: 287 seconds Initial run through of the Hossmachine Automatic Tool Changer Related: atc, change, cnc, hossmachine, tool |
 |
home switches and soft limits Posted by: hossmachine
Video duration: 596 seconds setup of home switches and soft limits in Mach 3 Related: atc, change, cnc, hossmachine, tool |
 |
MPG Brain Setup Part 1 Posted by: hossmachine
Video duration: 438 seconds MPG Brain Setup Part 1 Related: brain, console, hossmachine, mach, mpg |
 |
Tapping Attachment Posted by: hossmachine
Video duration: 432 seconds Added a stepper with 4:1 timing pulleys to the spindle. use the 4th axis to drive it. Related: attachment, cnc, hossmachine, tapping |
 |
Auto Corner Finding with Isolated Probe Posted by: hossmachine
Video duration: 369 seconds Auto Corner Finding with Isolated Probe I combined and modified the button scripts to give me 1 click auto X, Y and Z finding. CNC makes life easy. Related: atc, change, edge, finding, hossmachine, mach, screens, tool |
 |
mill console progress Posted by: hossmachine
Video duration: 201 seconds mill console progress so far Will use Mach 3 to control my CNC X2 Related: console, hossmachine, mach |
 |
C6 Setup and Demo Posted by: hossmachine
Video duration: 404 seconds Wired up the new C6 Spindle control board from Cnc4pc.com and show the setup for it. Related: c6, cnc4pc, console, control, hossmachine, mach, spindle |
 |
Tapping Attachment 2 Posted by: hossmachine
Video duration: 584 seconds tapping holes from 10-32 to 1/2-13 threads Related: attachment, cnc, hossmachine, tapping |
 |
Threading Tool Milling Posted by: hossmachine
Video duration: 161 seconds Cutting mild steel with the X2 .025 DOC, 2500 RPM Related: cutting, hossmachine, mach, steel |
 |
Z Axis Broaching Posted by: hossmachine
Video duration: 216 seconds A Z Axis Broaching experiment. Worked well enough to try it again when I need to put a keyway in a pulley. Related: broaching, hossmachine, keyway, mach |
 |
Warm Up Program Posted by: hossmachine
Video duration: 184 seconds Warm Up Program gets the oil distributed on the dovetails. Rapiding at X = 120 IPM Y = 80 IPM Z = 45 IPM 40 Volt Keling KL-4030 drivers 282 oz/in X and Y Related: hossmachine, keling, mach |
 |
hossmachine x2 freak progress Posted by: hossmachine
Video duration: 179 seconds x2 freak progress z axis operational Related: axis, freak, operational, progress, x2, z |
 |
power drawbar preliminary test Posted by: hossmachine
Video duration: 251 seconds power drawbar preliminary test Related: atc, change, cnc, hossmachine, tool |
 |
Flood Coolant Enclosure Posted by: hossmachine
Video duration: 228 seconds Flood Coolant Enclosure It's made out of plywood covered with Herculiner truck bed Coating. Related: cnc, coolant, enclosure, flood, hossmachine, mach |
 |
60 tooth timing pulley high res Posted by: hossmachine
Video duration: 452 seconds 60 tooth timing pulley high res Related: 4th, axis, cnc, hossmachine, mach |
 |
belt conversion overdrive Posted by: hossmachine
Video duration: 321 seconds Made an overdrive pulley for the motor on my belt conversion. On low I get 3600 RPM max and 6100 RPM max on high. Related: belt, cnc, conversion, hossmachine |
 |
16T ATC Swivel Mechanism Test Posted by: hossmachine
Video duration: 140 seconds 16T ATC Swivel Mechanism Test Related: atc, hossmachine, mach |
 |
16T ATC Toolrack Wedge Milling Posted by: hossmachine
Video duration: 469 seconds 16T ATC Toolrack Wedge Milling Related: atc, hossmachine, mach |
 |
16T ATC Swing Arm Posted by: hossmachine
Video duration: 92 seconds 16T ATC Swing Arm preliminary mockup Related: atc, hossmachine, mach |
 |
spindle control preview high res Posted by: hossmachine
Video duration: 508 seconds spindle control preview high res Related: atc, change, cnc, hossmachine, tool |
 |
tool change and M8/M9 tests Posted by: hossmachine
Video duration: 175 seconds Testing the Mach 3 tool change macro and activation of relays to control the drawbar and flood coolant Related: atc, change, cnc, hossmachine, tool |
