Video scenes shots:
Watch the video:
Other videos by this author:
 |
Automatic Tool Changer Posted by: hossmachine
Video duration: 287 seconds Initial run through of the Hossmachine Automatic Tool Changer Related: atc, change, cnc, hossmachine, tool |
 |
home switches and soft limits Posted by: hossmachine
Video duration: 596 seconds setup of home switches and soft limits in Mach 3 Related: atc, change, cnc, hossmachine, tool |
 |
Tapping Attachment Posted by: hossmachine
Video duration: 432 seconds Added a stepper with 4:1 timing pulleys to the spindle. use the 4th axis to drive it. Related: attachment, cnc, hossmachine, tapping |
 |
12x20 Tooling Plate Posted by: hossmachine
Video duration: 396 seconds 12x20 Tooling Plate construction Surfacing, drilling and tapping 3/8-16 holes. Related: attachment, cnc, hossmachine, mach, tapping |
 |
60 tooth timing pulley high res Posted by: hossmachine
Video duration: 452 seconds 60 tooth timing pulley high res Related: 4th, axis, cnc, hossmachine, mach |
 |
Optical Tool Setter Posted by: hossmachine
Video duration: 393 seconds Used a Veo USB webcam in my custom housing to align the spindle with a mark on the part. Can position it on a hole,cross hair, ceterpunch mark etc. Use Centrecam or the video window in Mach 3 Related: cnc, hossmachine, mach3, optical, setter, tool |
|
|
Mach 3 Backlash Compensation Posted by: hossmachine
Video duration: 592 seconds Mach 3 Backlash Compensation settings and demo circle pocket Related: backlash, compensation, hossmachine, mach |
 |
home switch covers with ATC Posted by: hossmachine
Video duration: 497 seconds Making a complete home switch cover using the Automatic Tool Changer Related: atc, change, cnc, hossmachine, tool |
 |
Tool Change 2 Posted by: hossmachine
Video duration: 207 seconds Improved tool change speed by limiting the Z travel between tool changes when there is no tool in spindle and corrected a rapid speed glich in keygrabber. Related: atc, change, cnc, hossmachine, tool |
 |
Tapping Attachment 2 Posted by: hossmachine
Video duration: 584 seconds tapping holes from 10-32 to 1/2-13 threads Related: attachment, cnc, hossmachine, tapping |
 |
power drawbar preliminary test Posted by: hossmachine
Video duration: 251 seconds power drawbar preliminary test Related: atc, change, cnc, hossmachine, tool |
 |
Hossmachine Control Panel Usage Posted by: hossmachine
Video duration: 298 seconds Demonstration of the Control Panel I made for the X2 CNC. Related: cnc, control, hossmachine, panel, x2 |
 |
4th axis OD engraving test 2 Posted by: hossmachine
Video duration: 215 seconds 4th axis OD engraving test 2 Related: 4th, axis, engraving, od |
 |
tool change and M8/M9 tests Posted by: hossmachine
Video duration: 175 seconds Testing the Mach 3 tool change macro and activation of relays to control the drawbar and flood coolant Related: atc, change, cnc, hossmachine, tool |
 |
Wheel Dressing and Y Axis Surface Grinding Posted by: hossmachine
Video duration: 211 seconds dressing the grinding wheel and regrinding on the Y axis Related: cnc, grinder, hossmachine, x2 |
 |
Setting Tools for ATC Part A Posted by: hossmachine
Video duration: 405 seconds Setting the tools to make a part using the ATC Related: atc, change, cnc, hossmachine, tool |
 |
C6 Setup and Demo Posted by: hossmachine
Video duration: 404 seconds Wired up the new C6 Spindle control board from Cnc4pc.com and show the setup for it. Related: c6, cnc4pc, console, control, hossmachine, mach, spindle |
 |
faster tool change Posted by: hossmachine
Video duration: 141 seconds faster tool change with the new rapids from the 40 volt power supply x=130IPM y=65IPM z=30IPM Related: atc, change, cnc, hossmachine, tool |
 |
Hossmachine X2 CNC Machining Posted by: hossmachine
Video duration: 163 seconds Sample of machining the engraver bracket and the control panel Related: cnc, hossmachine, x2 |
 |
hossmachine x2 freak progress Posted by: hossmachine
Video duration: 179 seconds x2 freak progress z axis operational Related: axis, freak, operational, progress, x2, z |
 |
Flood Coolant Enclosure Posted by: hossmachine
Video duration: 228 seconds Flood Coolant Enclosure It's made out of plywood covered with Herculiner truck bed Coating. Related: cnc, coolant, enclosure, flood, hossmachine, mach |
 |
Mach 3 Hotkeys Posted by: hossmachine
Video duration: 652 seconds Reconfiguring Mach 3 button hotkeys to work with my new mill console project Related: hossmachine, hotkeys, mach |
 |
X2 X-Axis 11 inches of travel and motor speeds 3:10 Posted by: hossmachine
Video duration: 190 seconds X2 X-Axis 11 inches of travel and motor speeds Related: cnc, hossmachine, x2 |
 |
spindle control preview high res Posted by: hossmachine
Video duration: 508 seconds spindle control preview high res Related: atc, change, cnc, hossmachine, tool |
 |
MPG Under Brain Control Posted by: hossmachine
Video duration: 383 seconds Shows the function of my Mill Console MPG Panel working under the control of a Brain with Mach 3 Related: brain, console, hossmachine, mach, mpg |
