 |
CNC Milling w/ Sandvik High Feed Endmill on Haas Posted by: Baumach
Video duration: 206 seconds Global video hits: 11075 Milling 4140 HT Rc 30-36. Feeding 225 IPM @ 0.035" D.O.C. The Part is a drive Coupling Machine is a Haas VF-4, 7000K spindle Related: cnc, end, haas, high, machining, mill, milling, speed |
 |
Carving Ice with Conical Endmill Bits Posted by: icecarvingsecrets
Video duration: 286 seconds Global video hits: 2690 A quick look at a few of the bits that ice carvers use with die grinders to quickly detail their sculptures. Seven and ten degree endmills, along with an ice needle, are used to make quick cuts in scrap ice. Carving by Dawson List of www.icecarvingsecret s.com Related: bit, carving, carvings, dawson, die, dragon, endmill, grinder, ice, icecarvingsecrets.com, list, sculpture, sculptures, secrets |
 |
End Mill Sharpening pt.1 Posted by: ICStools
Video duration: 600 seconds Global video hits: 1730 A demonstration of sharpening end mills with the Darex End Mill Sharpener. Part 1 Related: end, mills, sharpen |
 |
Great Aluminum Surface Finish with 4-flute endmill & 3M Scotchbrite Posted by: saunixcomp
Video duration: 346 seconds Global video hits: 729 Using my TAIG CNC Mill, a 4-flute HSS endmill, 7445 and 7447+ 3M Scotchbrite. The "feeds & speeds" on the milling were 5000 RPM, 7 IPM, and a 0.030" DOC. After the milling, I used 7447+ and then 7445 3M Scotchbrite handpads to polish the finish! The end result is silky smooth! Related: 3m, 6061, 7445, 7447+, aluminum, brite, cnc, endmill, flute, mill, polish, scotch, scotchbrite, taig |
 |
grinding end mill Posted by: stevechao
Video duration: 499 seconds Global video hits: 3573 machinery operation video Related: machinery, operation, video |
 |
Youth Freestyle Event @ whitewateractive.co.uk Mile End Mill Posted by: jjayes
Video duration: 516 seconds Global video hits: 759 British Youth Freestyle Festival 2008 Full quality DVD on sale, contact jjayes@hotmail.com Premier Outdoor Center, based on the river Dee @ Mile End Mill, Llangollen Wales. Related: activities, canoeing, dee, families, festival, freestyle, groups, kayaking, river, rodeo, school, youth |
 |
ISCAR chatter free endmill dry 4140 HT Posted by: Equinox187
Video duration: 54 seconds Global video hits: 1881 ISCAR, endmill, machining, CNC, trochordal, tool, path, tooling, high, speed, milling Related: cnc, endmill, high, iscar, machining, milling, path, speed, tool, tooling, trochordal |
 |
TRU TECH Systems - Tapered End Mill Grind (Part 2) Posted by: trutechsystems
Video duration: 533 seconds Global video hits: 184 5 Inch Tapered End Mill Grind Operation on the TRU TECH TT8500 Grinding System. Related: movie |
 |
Mile End Mill Posted by: Cowheaders
Video duration: 418 seconds Global video hits: 150 Westhoughton Canoe Club paddle at Mile End Mill, River Dee Related: canoe, dee, end, kayak, mile, mill, river, tombstones, westhoughton |
 |
Bridgeport cnc Mach3 boring 1.51 hole w 1/2 endmill Posted by: DavidCofer
Video duration: 40 seconds Global video hits: 7735 My home converted 1976 bridgeport cnc, converted from papertape to Pentuim4 and Mach3 software, using the wizard spiral boring to bore a 1.51 hole with a 1/2 endmill. Related: bridgeport, cnc, machine, machining, milling, robot, shop |
 |
Hard Milling Endmill 24 - 64 HRC Posted by: MMR12INPERMIN
Video duration: 109 seconds Global video hits: 195 HX series of endmills Numerous different applications, same endmill. Related: aerospace, automotive, end, fraisa, hard, hitachi, hot, machining, medical, mill, milling, osg, runner |
 |
Gorilla End Mill Profiling and Slotting 1018 Steel Posted by: MachineToolRecyclers
Video duration: 60 seconds Global video hits: 876 1/2" mill. Slotting: 6/10" depth, 600 SFM, .002 chipload/tooth on 4 flutes; profiling: 800 SFM, .003 chipload/tooth on 5 flutes. www.machinetoolrecyc lers.com Related: cnc, end, endmill, gorillamill, machinetoolrecyclers.com, mill, milling, profiling, slotting |
 |
TRU TECH Systems - Tapered End Mill Grind (Part 1) Posted by: trutechsystems
Video duration: 208 seconds Global video hits: 192 5 Inch Tapered End Mill Grind Operation on the TRU TECH TT8500 Grinding System. Related: movie |
 |
CNC Machining End Mill Aluminum Incredible MRR Posted by: MMR12INPERMIN
Video duration: 42 seconds Global video hits: 782 Fraisa AX-FP Related: aluminum, cnc, end, hitachi, lathe, machining, machinist, mill, mold, osg, swiss, vmc |
 |
Serpents Tail 2008 May level 4 at Mile End Mill Posted by: wyreforestcanoeclub
Video duration: 71 seconds Global video hits: 171 decent of Serpants Tail by kayak use of head camera Related: canoe, club, end, forest, kayak, llangollen, mile, mill, wyre |
 |
Hurco VMX42 End-mill Roughing Posted by: canyonplayer
Video duration: 16 seconds Global video hits: 4576 1018 Mild Steel milling at .490" WOC and .700" DOC at 61 IPM for 22 Cu"/min Related: hurco, machining, milling, vmc, vmx |
 |
grinding ball end mill Posted by: stevechao
Video duration: 203 seconds Global video hits: 4013 machinery operation video Related: ball, end, grinding, mill |
 |
mile end mill quick exit Posted by: lunar515
Video duration: 39 seconds Global video hits: 394 mile end mill revrese video Related: end, mile, mill |
 |
Machining 24 HRC NX-FP 708 SFM end mill Posted by: MMR12INPERMIN
Video duration: 52 seconds Global video hits: 236 The tool life on this tool was almost double what we were running. Not to mention, the MRR was awesome! Related: aerospace, automotive, cnc, frasia, haas, hitachi, how, hrc, iscar, machining, medical, metal, milling, osg, to |
 |
Chriss in his CU-Fly at Mile End Mill 2 Posted by: DevAnubis
Video duration: 19 seconds Global video hits: 205 Chriss in his CU-Fly at Mile End Mill at 14. Related: c1, cu_fly, kayak |
 |
End Mill Grinder PP-25 Posted by: peipingchang
Video duration: 170 seconds Global video hits: 8 Grinding capacity: Dia.6mm ~ Dia.25mm. Specially designed machine structure permits the set up of cutting lips and edges last sharpened at the same time. websitea: www.pei-ping.com Related: carving, cutter, drill, grinder, sharpener, tool, universal |
 |
MLI Video of a stabalized End Mill Cut Posted by: tsdelio
Video duration: 31 seconds Global video hits: 11 This is the cut after changing speed from the Chatter end mill cut Related: carbide, cut, end, machine, mill, stable, tool |
![Tormach PCNC1100 Roughing Op with 3/4\" Carbide EndMill](http://img.youtube.com/vi/VpGoa8zdS2c/2.jpg "Tormach PCNC1100 Roughing Op with 3/4\\" Carbide EndMill") |
Tormach PCNC1100 Roughing Op with 3/4" Carbide EndMill Posted by: ColinEFitzgerald
Video duration: 55 seconds Global video hits: 106 Here I'm milling a curved profile roughing operation with a Robb Jack 3/4" carbide 4 flute stub end mill. Related: cnc, tormach |
