 |
CNC Stomp Pad 5 - Mach 3 G-Code - Learn CNC Plasma Cutting Posted by: ivanirons
Video duration: 345 seconds In this video we go through Mach 3 to look over the g-code. We are checking to see if we have any problems before we go to the CNC Plasma Cutter. http://www.cncinf ormation.com Related: cad, cadcam, cam, cnc, cutting, diy, g-code, gcode, hobby, home, learn, pad, plasma, process, programming, sheetcam, stomp, tutorial |
 |
CNC Stomp Pad 4 - SheetCam - Learn CNC Plasma Cutting Posted by: ivanirons
Video duration: 389 seconds Here we set the CAM Programming parameters in SheetCam. Next we finalize the G-Code for the project. You also get a quick look at some CNC Post-Processing http://www.cncinf ormation.com Related: cad, cadcam, cam, cnc, cutting, diy, g-code, gcode, hobby, home, learn, pad, plasma, process, programming, stomp, tutorial |
 |
CNC Stomp Pad 6 | CNC Plasma Cutting Video Tutorial | CNC Posted by: ivanirons
Video duration: 278 seconds Last video we checked our g-code to make sure our program was correct. Now we go out to the shop and do some work. We zero out the cnc plasma cutter and start cutting our aluminum stomp pad. Once we are done, we look it over and note the slag or dross we will have to grind off next. http://www.cncinf ormation.com Related: cad, cadcam, cam, cnc, cutting, diy, g-code, gcode, hobby, home, learn, pad, plasma, process, programming, router, stomp, tutorial |
 |
CNC Stomp Pad 2 - CNC Design - Learn CNC Plasma Cutting Posted by: ivanirons
Video duration: 327 seconds In this next video we go over the design of the CNC Stomp Pad. We use Adobe Illustrator to sketch it out. We prepare something that a CNC Plasma Cutter could follow. http://www.cncinf ormation.com Related: cad, cadcam, cam, cnc, cutting, diy, g-code, gcode, hobby, home, learn, pad, plasma, process, programming, stomp, tutorial |
 |
CNC Stomp Pad 3 - Rhino CAD - Learn CNC Plasma Cutting Posted by: ivanirons
Video duration: 265 seconds In this CNC Tutorial Video we go over the design in CAD. We resize it to our dimensions and then convert it into a DXF File. Finally the DXF File is ready for CAM. http://www.cncinf ormation.com Related: cad, cadcam, cam, cnc, cutting, diy, dxf, g-code, gcode, hobby, home, learn, pad, plasma, process, programming, rhino3d, stomp, tutorial |
 |
CNC Stomp 1 - CNC Project Introduction - Learn CNC Cutting Posted by: ivanirons
Video duration: 215 seconds CNC Project that is shot in a tutorial sequence. It goes from the Design, CAD, CAM, Control, CNC Plasma Cutting and then final assembly. Check out this CNC How-To. http://www.cncinf ormation.com Related: cad, cadcam, cam, cnc, cutting, diy, g-code, gcode, hobby, home, learn, pad, plasma, process, programming, stomp, tutorial |
 |
CNC Stomp Pad 7 | Part Grinding | CNC Plasma Video Tutorial Posted by: ivanirons
Video duration: 138 seconds When you cut something out with a plasma cutter there is slag left over you have to remove. This slag is officially called "dross" when it come to plasma cutting. In this video we rough grind the cnc stomp pad to remove the dross. I call it rough grind because later we will use a DA Sander to smooth it all out. http://www.cncinf ormation.com Related: cad, cadcam, cam, cnc, cutting, diy, g-code, gcode, grind, hobby, home, learn, metal, pad, plasma, process, programming, stomp, tutorial |
